System Power-On - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual

5.2 System Power-On

Prerequisites
You have performed the operations described in


Context
In a scenario with a smart array controller, the SmartLogger is installed before delivery, and
the power cable is connected.
Procedure
Step 1 Insert the output terminal of the power adapter into the 12V IN port of the SmartLogger.
Step 2 Insert the power cable into the power adapter.
Step 3 Insert the power cable plug into an AC socket.
In a scenario without a smart array controller, place the power adapter on the top of the
SmartLogger and secure the power adapter using cable ties.
Figure 5-1 Connecting the power cable in a scenario without a smart array controller
Step 4 Switch on the circuit breaker of the AC socket.
Issue 04 (2018-04-10)
When powering on the system, use the supplied power adapter. The power adapter model
varies depending on regions. For example, in the member countries of the EU, the power
adapter used in the SmartLogger2000-10/10-B/11-B is FUHUA HW-60-12AC14D, and
the power adapter used in the SmartLogger2000-10-C/11-C is FUHUA HW-24-12AC14D.
The rated input of the power adapter is 100–240 V AC, and 50 Hz or 60 Hz. If adapters of
other models are used, the equipment may be damaged.
Select an AC socket that matches the power adapter.
The adapters and sockets vary in different regions.
prevail.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5.1 Checking Before Power-On.
Figure 5-1 is for reference only. The actual objects
5 System Operation
73