Setting Plant Information - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
Figure 7-42 Setting the date and time




7.10.1.2 Setting Plant Information

After you set plant information, a plant configuration file can be generated. You can upload
this file to a third-party hosting website to implement remote monitoring.
Because of permission restriction, log in as Common User or Advanced User. Choose
Settings > Plant to access the target page.
Issue 04 (2018-04-10)
The Local time zone parameter is unavailable for zones without DST.
After Date&Time is set, the date and time of all the inverters connected to SmartLogger
are updated accordingly. Ensure that the settings are correct.
Modification of Date&Time may affect the recording of energy yield and performance
data. Therefore, do not change the time zone or system time arbitrarily.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
147