Maintenance; Upgrading Firmware - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
Parameter
Power lowering
adjustment period

7.11 Maintenance

7.11.1 Upgrading Firmware

You can upgrade the firmware of the SmartLogger, inverter, PLC module, or PID module over
the WebUI.
Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Firmware Upgrade to access the target page.
Figure 7-70 Firmware upgrade
Issue 04 (2018-04-10)
Description
Setting the inverter
output power lowering
period.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameter
Switch-off with 0%
power limit
7 WebUI
Description
Setting whether to switch
off the DO port.
When this parameter is
set to Enable, the settings
of the Switch-off control
port, Switch-on control
port, Switch-off state
feedback port, and
Switch-on state
feedback port are also
enabled.
172