Safety Precautions - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
Read the safety precautions carefully. Otherwise, human injury and equipment damage may
occur.
Personnel Requirements


Read this document thoroughly before operations. Huawei shall not be liable for any
consequence caused by violation of the storage, transportation, installation, and operation
regulations specified in this document.
Label Protection


Installation





Issue 04 (2018-04-10)
Only qualified and trained electrical technicians are allowed to install and operate the
SmartLogger.
Operators should understand the components and functioning of a grid-tied PV power
system, and they should be familiar with relevant local standards.
Do not tamper with any signs on the SmartLogger enclosure because these signs contain
important information about safe operation.
Do not remove or damage the nameplate at the rear of the SmartLogger enclosure
because it contains important product information.
Ensure that the SmartLogger is not connected to a power supply and is not powered on
before starting installation.
Install the SmartLogger in an environment with good ventilation to ensure efficient and
long-term system performance.
Ensure that the heat dissipation holes of the SmartLogger are not blocked.
During installation, do not touch any component inside the enclosure except the wiring
terminals at the bottom.
Install the SmartLogger in a dedicated area.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1

Safety Precautions

1 Safety Precautions
1