SmartLogger2000
User Manual
7.8.6.2 Setting Running Parameters
Because of permission restriction, log in as Advanced User. Choose Monitoring > Meter >
Running Param. to access the target page.
Figure 7-31 Setting running parameters
7.8.7 PID
7.8.7.1 Querying Related Information
Choose Monitoring > PID and query related information on the displayed page.
Issue 04 (2018-04-10)
You can click the
the tertiary navigation menu to query meter information.
The performance data of the meter can be exported. When changing the name of the exported file,
retain the extension .tar.gz. Otherwise, the file will be unusable.
Set running parameters only for the power meter that supports the DL/T645 protocol.
This document describes the page displayed when the PID01 module is connected as an example.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
,
7 WebUI
, or
tab on
134