Nameplate Description - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
Port (Silk
No.
Screen)
a:
 If the APP fails to connect to the SmartLogger or you have forgotten the IP address, you can press the
Default key to reset the Bluetooth module or restore the IP address to the default IP address (192.168.0.10).

Press and hold down the Default key for 3s to 10s to reset and restart the Bluetooth module. Press and hold
down the Default key for 3s to 10s until the BLU indicator blinks at short intervals (on for 0.125s and then
off for 0.125s) and all the other indicators are off, and then release the Default key.
 Press and hold down for more than 10s to restore the IP address to the default IP address. Press and hold
down the Default key for more than 10s until the RUN indicator blinks at short intervals (on for 0.125s and
then off for 0.125s) and all the other indicators are off, and then release the Default key. The operation is
valid within 5 minutes.
b: When the SmartLogger is applied in a non-smart array controller, connect the AC1 and AC2 ports to the
SPD with the delivered cables. The residue voltage of the SPD should be less than 6 kV.
c: Passive means that the AI port supports the connection to a sensor that requires a separate external power
supply.

2.3 Nameplate Description

A nameplate is attached at the back of the SmartLogger. The content of the nameplate
includes the SmartLogger model, rated power specifications, and certification marks.
2-6
Issue 04 (2018-04-10)
Function
shows the nameplate of the SmartLogger2000-10-C.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
2 Product Overview
Figure
12