Huawei SmartLogger2000 User Manual page 19

SmartLogger2000
User Manual
Bottom of the Shell
Figure 2-4 SmartLogger2000-10/10-B/11-B bottom
Table 2-2 Port description
No. Port (Silk Screen)
1 RF1, RF2
2 12V OUT
3 12V IN
4 USB
5 SFP1, SFP2
6 ETH1, ETH2
7 DO
8 COM1–COM6
9 Default
10 AC1, AC2
11
Issue 04 (2018-04-10)
Function
Reserved
12 V DC output
12 V DC input
USB port
Ethernet optical port
Ethernet electrical port
Digital parameter output
RS485 communication
Default key
AC power cable ports
External grounding
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Reserved.
Provides 12 V DC power supply with a
maximum current of 100 mA.
Connects to a power adapter.
Connects to a USB flash drive.
Connects to an Access Terminal Box
(ATB) or another cascaded SmartLogger.
Connects to an Ethernet switch, router,
POE module, or PC.
Relay output; supports the voltage of 12 V
and current of 0.5 A.
Six RS485 ports that can be connected to
devices such as the inverter, box-type
transformer, electricity meter, or EMI
Resets and restarts the Bluetooth module
or resets the SmartLogger IP address to
a
the default IP address . The default IP
address is 192.168.0.10.
 SmartLogger2000-10/10-B: Connects
to the A, B, and C three-phase inputs,
and used for PLC with the SUN2000
over AC power cables. If PLC function
is not used, you do not have to connect
cables to these ports.
 SmartLogger2000-11-B: disabled
N/A
2 Product Overview
9