SmartLogger2000
User Manual
Figure 7-81 Clearing alarms
7.11.8.5 Re-collecting Performance Data
You can re-collect previous performance data and energy yield over the WebUI.
Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Collect Perf. Data to access the target page.
Issue 04 (2018-04-10)
By clearing alarms, users can clear all active and historical alarms for the selected device
and enable the SmartLogger to re-collect alarm data.
By clearing alarms, users can clear the local SmartLogger alarms or device storage alarms.
If the version of the SUN2000-(8KTL-28KTL) is earlier than SUN2000 V100R001C81,
users can only clear local SmartLogger alarms by performing the operation.
If Clear Alarm is performed for the Huawei devices such as the inverter and PID, Alarm
Reset must be performed on the NMS. Otherwise the SmartLogger cannot collect alarm
data from the devices after alarms are cleared.
If Clear Alarm is performed for the SmartLogger, Alarm Reset must be performed on the
NMS. Otherwise the SmartLogger cannot collect alarm data from the devices after Alarm
Reset is performed.
This function is not applicable to the SUN2000-(8KTL-28KTL) inverter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
182