System Wiring Diagram - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
Figure 2-9 LTE+RS485/PLC network diagram

2.5 System Wiring Diagram

Scenario with a Smart Array Controller
Issue 04 (2018-04-10)

The IP addresses for the SmartLogger, CPE, and monitoring device in the box-type transformer must
be in the same network segment.

The IP address planned for the SmartLogger needs to be imported to the third-party NMS for the
NMS to proactively connect to the SmartLogger.
 The IP address planned for the box-type transformer needs to be imported to the third-party NMS for
the NMS to proactively connect to the box-type transformer.
 Huawei smart array controller, also a communication box, is an outdoor cabinet that controls the
communication of the PV array in a PV plant. The cabinet can house the SmartLogger, ATB, and
POE module.

This document describes the application scenario where the SmartLogger is inside the smart array
controller SmartACU2000B-D-2PID/2PLC.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Product Overview
17