Huawei SmartLogger2000 User Manual page 78

SmartLogger2000
User Manual
Figure 4-25 Removing the terminal block
Step 4 Connect cables to the terminal block and secure the cables.
Figure 4-26 Connecting cables
Step 5 Insert the terminal block into the DI port.
To ensure that the power grid scheduling function is normal, set the corresponding parameters
(Active Power Control or Reactive Power Control) on the embedded WebUI after
connecting cables. For details, see
----End
Follow-up Procedure
Disconnection can be performed in reverse order.
Issue 04 (2018-04-10)
Use a flat-head screwdriver to remove the terminal block.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Power Grid Scheduling.
4 Electrical Connection
68