Electrical Connections; Connecting The Ac Output Power Cable - Huawei SUN2000 User Manual

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual

5.3 Electrical Connections

5.3.1 Connecting the AC Output Power Cable

Connecting the AC Output Power Cable for Home Load
An AC switch must be installed on the AC side of the SUN2000 to ensure that the SUN2000
can be safely disconnected from the power grid.
Do not connect loads between the SUN2000 and the AC switch.
Step 1 Install the pipe fittings. For details, see
Step 2 Route the AC output power cable through the conduit and then the fitting of the pipe.
Step 3 Connect the AC output power cable to the terminal block.
Step 4 Secure the fitting to the conduit.
Step 5 Check that the cables are connected correctly and securely. Then take appropriate measures to
ensure that the pipe conduit and fittings are secured reliably, and seal the cable holes.
Step 6 Keep the maintenance compartment clean.
Issue 01 (2018-05-21) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5.2 Installing the Pipe Fittings.
5 Electrical Connections
43