2.6.5 Connecting power supply
Location
The following illustration shows the location of the power input connector on the
front panel of the controller.
xx0900000266
F
Prerequisites
Equipment
Power supply cable (single phase)
External circuit breaker
External earth fault protection at control cables 3 -15m
External earth fault protection at control cables >15m
Circuit Diagram
3HAC035738-001 Revision: E
Note
How to manufacture a cable with connector is described in section
CAUTION
Always inspect the connector for dirt or damage before connecting it to the
controller. Clean or replace any damaged parts.
XS0 Power input connector
© Copyright 2009-2013 ABB. All rights reserved.
2 Installation and commissioning
2.6.5 Connecting power supply
Note
20A
30mA
300mA
3HAC031403-003
Continues on next page
on page
?.
53