ABB IRC5 Compact Product Manual page 135

3
4
5
6
7
Refitting
Use this procedure to refit one of the system fans.
1
2
3
4
5
6
3HAC035738-001 Revision: E
Action
Remove three attachment screws on the fan cover.
Push the fan cover rightwards and remove it.
Disconnect the connectors to the fan.
Loosen the attachment screw on the fan receptacle.
Push the fan upwards and remove it.
Action
DANGER
Before commencing any work inside the cabinet, please observe the safety information
in section DANGER - Make sure that the main power has been switched off! on page
Put the fan in place and push it downwards.
Fasten the attachment screw on the fan receptacle.
Connect the connectors to the fan.
Put the fan cover in place and push it leftwards.
Fasten the three attachment screws on the fan cover.
© Copyright 2009-2013 ABB. All rights reserved.
4.13 Replacement of system fans
4 Repair
Continued
29.
135