2 Installation and commissioning
2.4.2 Mounting the FlexPendant holder
Continued
2
40
Action
Press the mounting plate with FlexPendant
holder against the top of the control cabinet.
Note
The surface must be clean and dry.
Note
For rack mounted IRC5 Compact, do not place the FlexPendant holder on top
of the rack. Find a solution where the FlexPendant is placed so that it cannot fall
to the floor from a high position.
© Copyright 2009-2013 ABB. All rights reserved.
Note/illustration
3HAC035738-001 Revision: E