ABB IRC5 Compact Product Manual page 85

2
3
4
5
3HAC035738-001 Revision: E
Action
Cut off one of the removable covers for
cables on the protective cover and mount
the Grommet strip (3HAC033247-001) on
the sharp edge of the hole to protect the
cable from being cut.
Connect antenna cable to the antenna con-
nector on the PCI card bracket and route it
through the hole in the protective cover.
Close the protective cover and tighten the
thumb screw.
Place the antenna on top of the controller.
© Copyright 2009-2013 ABB. All rights reserved.
2 Installation and commissioning
2.11.3 Installation of Remote Service antenna
Info
xx0900000448
xx1000000327
• A: Remote Service WAN
• B: Antenna connector
• C: Remote Service LAN
Continued
85