ABB IRC5 Compact Product Manual page 138

4 Repair
4.14 Replacement of brake resistor bleeder
Continued
2
3
4
5
6
7
8
138
Action
Refit the brake resistor bleeder
by sliding the recesses in be-
neath the lower attachment
screw heads, and push it inwards
and then downwards.
Refit the upper attachment
screw.
Tighten all the attachment screws
for the bleeder.
Get the bleeder cable through the
hole on the back cover of the
cabinet.
Refit the fan cover, push it left-
wards to the grooves.
Refit the attachment screws for
the fan cover, and tighten them.
Reconnect the bleeder cable to
the drive unit.
© Copyright 2009-2013 ABB. All rights reserved.
Note/illustration
xx0900000599
• A: upper attachment screw
• B: lower attachment screws
3HAC035738-001 Revision: E