ABB IRC5 Compact Product Manual page 87

Procedure
Use the following procedure to extend the external terminal blocks.
1
2
3HAC035738-001 Revision: E
Action
Fit the mounting rail with all the
terminal blocks to the top or the
right side of the cabinet with two
attachment screws.
Connect XP7 and XP9 to the
connector XS7 and XS9 on the
front of the cabinet.
© Copyright 2009-2013 ABB. All rights reserved.
2 Installation and commissioning
2.11.4 Installation of external terminal blocks
xx0900000368
• A: Screw holes for mounting rail
Continued
87