ABB IRC5 Compact Product Manual page 116

4 Repair
4.7 Replacement of DeviceNet Lean board
Continued
Refitting
Use this procedure to refit the DeviceNet Lean board.
1
2
3
4
116
Action
DANGER
Before commencing any work inside the cabinet,
please observe the safety information in section
DANGER - Make sure that the main power has been
switched off! on page 29.
xx0200000023
WARNING!
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the section
WARNING - The unit is sensitive to ESD! on page 30
Gently lift the DeviceNet Lean board out of the ESD
safe bag and remove the attachment screws to de-
tach the DeviceNet Lean board from the card
bracket.
Fit the DeviceNet Lean board into position in the
cabinet. Secure it with its attachment screws.
© Copyright 2009-2013 ABB. All rights reserved.
Info
C
B
xx0900000626
3HAC035738-001 Revision: E
A