ABB IRC5 Compact Product Manual page 118

4 Repair
4.8 Replacement of PCI boards
Continued
Equipment
DeviceNet Master/Slave dual
PROFINET Master/Slave
Application manual - PROFIBUS-
DP
Application manual - DeviceNet
Application manual - PROFINET
master/slave
Circuit diagram
Removal
The procedure below details how to remove the PCI cards .
1
2
3
4
Continues on next page
118
Action
DANGER
Before commencing any work inside the cabinet,
please observe the safety information in section
DANGER - Make sure that the main power has been
switched off! on page 29.
xx0200000023
WARNING!
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the section
WARNING - The unit is sensitive to ESD! on page 30
Remove the thumb screw and open the cover on
the front panel of the controller.
Identify the card to be replaced.
© Copyright 2009-2013 ABB. All rights reserved.
Art. no. Note
3HAC025780-001 DSQC 659. DeviceNet communica-
tion is described in Application
manual - DeviceNet.
3HAC033556-001 DSQC 678 PROFINET communica-
tion is described in Application
manual - PROFINET master/slave.
3HAC023008-001 Contains information on how to
configure the system for Profibus
cards.
3HAC020676-001 Contains information on how to
configure the system for DeviceNet
cards.
3HAC031975-001 Contains information on how to
configure the system for PROFINET
master/slave card DSQC 678.
3HAC031403-003
Note/Illustration
xx0900000268
The barcode sticker contains in-
formation on type designation.
• A: thumb screw
3HAC035738-001 Revision: E