Connecting Power Supply - ABB IRC5 Compact Product Manual

2.6.4 Connecting power supply

How to manufacture a cable with connector is described in section
connector on page
Always inspect the connector for dirt or damage before connecting it to the
controller. Clean or replace any damaged parts.
Location
The following illustration shows the location of the power input connector on the
front panel of the controller.
xx1400001372
A
B
C
Product manual - IRC5 Compact
3HAC047138-001 Revision: G
Note
74.
CAUTION
Description
XS.4 FlexPendant connection
XS.1 Robot power connection
XS.41 Additional axes SMB connection
© Copyright 2009-2017 ABB. All rights reserved.
2 Installation and commissioning
2.6.4 Connecting power supply
A
B
C
D
E
Continues on next page
Fitting the
71