Relays; On Time; Figure 39: Adding And Editing A Group - GE RPV311 Technical Manual

Chapter 4 – Configuration
16

Relays

16.1

On time

86
Once the group is created, it shows in the configuration interface menu. When
selecting the group, a screen shows its characteristics, as shown in the figure below.
It is possible to edit all the fields.

Figure 39: Adding and editing a group

A The <R > button allows user to delete the group.
EMOVE
Relays indicate events or state transitions and set off the alarm on the equipment.
RPV311 provides four relays: three relays set by the user and one factory default
relay, which signals internal equipment failure.
In this section, shown in
logging signaling events.
Figure 40, it is possible to configure the relays on time for
RPV311
RPV311-TM-EN-7