Chapter 4: Configuration; Accessing The Equipment Configuration - GE RPV311 Technical Manual

RPV311
Distributed Multifunction Fault Recorder

Chapter 4: Configuration

1

Accessing the Equipment Configuration

Default username and password to enter the configuration interface
Username
Password
This chapter includes concise instructions of how to configure all available features in
the device.
Access to the equipment's configuration is provided by the Web Interface. When the
equipment is accessed, a copy of the current configuration is maintained on the
equipment until a new configuration is sent.
To enter the configuration interface, click on the <C
Interface. A new window is open. The username and password are required. The
default username and password are:
admin
1234
The initial configuration screen is shown in
> button of the initial Web
ONFIGURE
Figure 8.