GE RPV311 Technical Manual page 253

Chapter 16 – Maintenance and Troubleshooting
RPV311-TM-EN-7
2. Perform a visual inspection on the device to make sure there are no
remainders of the repair service inside the casing or any other
noncompliance;
3. Place back the top side of the case and fasten it using the proper screws;
4. Connect the grounding strap and then the power supply to the equipment;
5. Wait for the equipment to initialize, it will run self-diagnostic routines and if
everything is right the "Ready" LED on its front panel will light up indicating
the equipment is safe and operational;
6. Follow the procedures in the Chapter 2: Safety Information.
RPV311
253