Configuration History; Equipment; Identification - GE RPV311 Technical Manual

RPV311
1.1

Configuration History

2

Equipment

2.1

Identification

RPV311-TM-EN-7
The history of changes in the equipment configuration can be shown in the Web
Interface. The information shown is:
Revision Indicates the number of each configuration;
Time stamp Indicates the date and time the configuration was changed;
User Indicates who changed the configuration;
Description Describes the change.
To obtain a report about the configuration, select the revision of the configuration
and click on the <R
EPORT
information about the configuration selected.
On this screen, shown below, it is possible to configure the equipment identifier,
location and owner.
These three fields make up the equipment file name pursuant to the COMNAME rule.
The equipment identification will appear in the name of the records; therefore, it is
very important that it be properly identified. The name format of the records is:
date,hour,location,identifier,owner...
> button. A new window will open displaying all the
Chapter 4 – Configuration
47