Figure 65: Monitoring Circuit Quantities Via Web Interface - GE RPV311 Technical Manual

RPV311
2.7.3 V & I Circuits
RPV311-TM-EN-7
It is possible to create a waveform or synchrophasor records using the buttons at the
top right corner of the screen.
The user will be able to monitor the values of voltage and current circuits, via Web
Interface:
M > V & I C
ONITORING
In this interface, up to 4 channels of voltage or current can be simultaneously
monitored, as shown in

Figure 65: Monitoring circuit quantities via Web interface

A Phasor angle for each phase of the selected circuit.
B Selected circuit to be monitored.
C Quantities related to the circuits being monitored.
Phasor angles measured and displayed are absolute angles referenced to the PPS
signal provided by the synchronization. When no sync signal is connected, the
measured angles are referenced to Phase A of the reference circuit.
Values are updated at the rate of 2 points per second, however, when two or more
circuits are simultaneously displayed, their time stamps may not be related to each
other.
IRCUITS
Figure 65.
Chapter 5 – Operation
125