Figure 3: Front View Of The Rpv311 - GE RPV311 Technical Manual

Chapter 3 – Hardware Design
2.1.2 Components
RPV311-TM-EN-7
 Historical average at aggregation intervals of 1 or 10 minutes (optional);
Measurement and recording of harmonics up to the 50th order according to

IEC 61000-4-7 (optional);
 Measurement and recording of flicker according to IEC 61000-4-
15:1997+A1:2003 (optional);

Cross-trigger using standard network connection;

One-end fault location based on Takagi algorithm;

Flexible communication:
Two 10/100BaseT electrical Ethernet interfaces;

Two embedded optical Ethernet converters;

 RS232 serial port for modem connection;

Support for IEC 61850:
Up to 320 binary inputs related to GOOSE messages (optional);

Two Ethernet ports for redundant connection (optional);

One Ethernet port for Process Bus (Sampled Values) connection (optional).


Local interface on the front panel;

dry-contact relays for remote signalling;

Fax and/or e-mail message after detection of a trigger. The fax can be sent to
two different destinations and the e-mail to four different destinations (optional).
Front view of the RPV311, showing all the main components on the front panel.
A

Figure 3: Front View of the RPV311

A Indicators of the state of the equipment:
B
C
RPV311
37