Figure 82: Screen To Configuration On The Scl File - GE RPV311 Technical Manual

RPV311
RPV311-TM-EN-7

Figure 82: Screen to configuration on the SCL file

The <O > button is to confirm the changes in the files list. The <C
K
cancel the changes. The <A
remove a file of the list of IED configurations, loaded onto the initial screen.
When a file is removed, it is necessary to know that the configuration files are not
modified. It is not possible to view the GOOSE C
if the file is removed, however the configuration of the digital input of the RPV
remains active.

Association between GOOSE messages RPV digital inputs
To associate a GOOSE Control Block to a digital input, do the following:
Initially select an element GOOSE binary of the GOOSE Control Block list, obtained of
the SCL files generated by IED;
Select one of the 320 RPV digital inputs according to GOOSE;
Click on the button to make association between the GOOSE message and the
previously selected RPV digital input;
The message indicating the operation will show in the status area;
To remove the association click on the disassociation button.;
The user can only associate a GOOSE C
compatible with the permitted limits on GOOSE. An example of a combination of
GOOSE C B
ONTROL LOCK
It is possible to associate a GOOSE C
is compatible with the permitted GOOSE message data. An example of association of
a GOOSE C B
ONTROL LOCK
> and <R
F
DD ILES EMOVE
ONTROL
with a digital input.
B
ONTROL LOCK
with a digital input is shown in
Chapter 12 – RPV Tools
ANCEL
> buttons are used to add or
F
ILES
B , associated with an input
ONTROL LOCK
B with a digital input if the data is
LOCK
with a digital input only if the data
Figure 83.
> button is to
183