Configuration Tool; Figure 78: Configuration Tool Main Screen - GE RPV311 Technical Manual

RPV311
1.3

Configuration Tool

1.3.1 Description
RPV311-TM-EN-7
The Configuration Tool allows creation of offline equipment configuration and
sending of it to several RPV's. With this tool it is possible to make a safety backup of
all the equipment configurations and either export them to a file server or keep them
locally on the user's PC.
The user interface is based on the Web Interface used to access the equipment. A
Web browser is required to run this tool.
An Ethernet or a modem interface makes access for sending or receiving
configuration to from the equipment. Once it is received, the equipment
configuration is stored locally and may be edited or renamed without requiring any
other access to such equipment.
To send a configuration it is mandatory that the connection to equipment be
available. The same configuration may be sent to different pieces of equipment.
The user must beware that all configuration parameters are immediately effective
once the configuration has been transmitted. Wrong configuration parameters may
set the equipment to Not Ready or cause loss of communication.
By clicking the Configuration Tool icon, the PC's default Web browser will open the
tool. The main screen is shown in

Figure 78: Configuration Tool main screen

A Shows the identification and the version of the RPV Tools.
Figure 78.
Chapter 12 – RPV Tools
171