User; Figure 16: Equipment Access Control Configuration Section - GE RPV311 Technical Manual

RPV311
2.7

User

RPV311-TM-EN-7

Figure 16: Equipment access control configuration section

A The U
SE PASSWORD FOR ALL ACCESS LEVELS
access equipment operation and configuration via Web Interface.
B The F
IRMWARE UPDATE PASSWORD
password to update the firmware for the equipment. The factory-set default
password is 12345. This field cannot be disabled.
C The D
OWNLOAD PASSWORD
access the automatic file records scanning. The factory-set default password is
12345. This field cannot be disabled.
D The GOOSE
CONFIGURATION PASSWORD
password to configure the GOOSE application. The factory-set default password is
12345. This field cannot be disabled.
The password can have up to 8 characters and following ones are allowed:
Alphabetic, numeric, upper and lower case, dash (-) and underscore (_).
It is possible to either add a new user or configure the administrator user.
In the Add a new user section, shown in
different access levels.
check box enables use of password to
text field allows user to enter an independent
text field allows user to enter an independent password to
text field allows user to enter an independent
Figure 17, it is possible to add users with
Chapter 4 – Configuration
57