Power Circuit; Figure 24: Adding And Editing Power Circuits - GE RPV311 Technical Manual

RPV311
5

Power Circuit

RPV311-TM-EN-7
Power circuits can be created of circuit voltage and current.
To add a new power circuit select the P
The I text field allows user to enter a single code for the circuit being defined
DENTIFIER
(maximum 15 characters). No editing allowed;
The V scroll box allows user to select a code of the voltage circuit to be
OLTAGE CIRCUIT
used;
The C scroll box allows user to select a code of the current circuit to be
URRENT CIRCUIT
used.
Once the circuit is created, it shows in the configuration interface menu. When
selecting the circuit, a screen shows the characteristics of the circuit selected, as
shown in Figure 24. It is possible to edit the voltage or current circuit.
The frequency is calculated individually for each circuit as long as the magnitude of
the voltage is over 10% of the nominal magnitude configured in the Voltage Circuit
window. The frequency track occurs within the range of Nominal Frequency ±5Hz.

Figure 24: Adding and editing power circuits

The <R > button allows user to rename the circuit.
ENAME
The <R > button allows user to delete the circuit.
EMOVE
Chapter 4 – Configuration
C section and fill in the following:
OWER IRCUITS
65