GE RPV311 Technical Manual page 169

RPV311
1.2.4 Starting Scanner
1.2.5 Terminating the Scanner
1.2.6 Records
RPV311-TM-EN-7
<timeout>60</timeout>
<records>
<record>fault</record>
</records>
<bandwidth>0</bandwidth>
<delete>yes</delete>
<modem enabled="no">
</modem>
</equipment>
</list>
</scanner>
There are 2 possible ways to start the Scanner:
1. Double click on the Scanner icon on the Desktop;
Click on Start > Programs > RPV > Scanner.
2.
The Windows security alert window may appear during the first cycle of the
Scanning. Click on the <U
Example:
C:\RPV\scanner\resources>scanner Scanner 02A00 Starting cycle #1
#1: Scanning records of the RPV 192.168.0.195: "fault disturbance steadystate soe"
#1: Records transferred of 192.168.0.195. Waiting 300.0 seconds for the next cycle...
To stop using the Scanner, either press <C
The records received are saved in C:\RPV\records,as shown in
[location, RPV identifier]\[record type]\.
> button to start the second cycle.
NBLOCKED
> + <C> or close the command Prompt.
TLR
Chapter 12 – RPV Tools
Figure 77.
169