Configuring Language Settings; Changing The Language; Installing Language Packs - Cisco TelePresence Administrator's Manual

Configuring language settings

The Language page (Maintenance >
web user interface.

Changing the language

You can configure both the default language and the language to use on an individual browser:
Field Description
System The default language used on the web
default interface.
language
This The language used by the current browser
browser on the current client computer. It can be set
to use either the system default language or
a specific alternative language.

Installing language packs

You can install new language packs or install an updated version of an existing language pack.
Language packs are downloaded from the same area on cisco.com from where you obtain your VCS
software files. All available languages are contained in one language pack zip file. Download the appropriate
language pack version that matches your software release.
After downloading the language pack, unzip the file to extract a set of .tlp files, one per supported language.
To install a .tlp language:
1. Go to the Language page
2. Click Browse and select the .tlp language pack file you want to upload.
3. Click Install.
The selected language pack is then verified and uploaded.
4. Repeat steps 2 and 3 for any other languages you want to install.
For the list of available languages, see the relevant release notes for your software version.
Note that:
English (en_us) is installed by default and is always available.
n
You cannot create your own language packs. Language packs can be obtained only from Cisco.
n
If you upgrade to a later version of VCS software you may need to install a later version of the associated
n
language pack to ensure that all text is available in the chosen language.
Cisco VCS Administrator Guide (X7.2)
Language) controls which language is used for text displayed in the
You can also get to the Language
bottom of every page.
(Maintenance > Language).
page by clicking on the
Usage tips
You can select from the set of installed language packs.
This setting applies to the browser currently in use on
the client computer. If you access the VCS user
interface using a different browser or a different
computer, a different language setting may be in place.
Maintenance
Language link at the
Page 288 of 498