Cisco TelePresence Administrator's Manual page 458

AllowListAdd
Adds an entry to the Allow List.
PatternString(r): <S: 1, 60>
Specifies an entry to be added to the Allow List. If one of an endpoint's aliases matches one of the patterns in
the Allow List, the registration will be permitted.
PatternType: <Exact/Prefix/Suffix/Regex>
Specifies whether the entry in the Allow List is a prefix, suffix, regular expression, or must be matched exactly.
Exact: the string must match the alias character for character. Prefix: the string must appear at the beginning of
the alias. Suffix: the string must appear at the end of the alias. Regex: the string will be treated as a regular
expression.
Default: Exact.
Description: <S: 0,64>
A free-form description of the Allow List rule.
Example: xCommand AllowListAdd PatternString: "John.Smith@example.com" PatternType:
Exact Description: "Allow John Smith"
AllowListDelete
Deletes an entry from the Allow List.
AllowListId(r): <1..2500>
The index of the entry to be deleted.
Example: xCommand AllowListDelete AllowListId: 2
Boot
Reboots the VCS.
This command has no parameters.
Example: xCommand boot
CheckBandwidth
A diagnostic tool that returns the status and route (as a list of nodes and links) that a call of the specified type and
bandwidth would take between two nodes. Note that this command does not change any existing system
configuration.
Node1(r): <S: 1, 50>
The subzone or zone from which the call originates.
Node2(r): <S: 1, 50>
The subzone or zone at which the call terminates.
Bandwidth(r): <1..100000000>
The requested bandwidth of the call (in kbps).
CallType(r): <Traversal/NonTraversal>
Whether the call type is Traversal or Non-traversal.
Example: xCommand CheckBandwidth Node1: "DefaultSubzone" Node2: "UK Sales Office"
Bandwidth: 512 CallType: nontraversal
Cisco VCS Administrator Guide (X7.2)
Reference material
Page 458 of 498