Cisco TelePresence Administrator's Manual page 173

Field Description
Pattern type How the Pattern string must match the alias for
the rule to be applied. Options are:
Exact: the entire string must exactly match the
alias character for character.
Prefix: the string must appear at the beginning
of the alias.
Suffix: the string must appear at the end of the
alias.
Regex: treats the string as a
Pattern string The pattern against which the alias is compared.
Pattern Determines whether the matched part of the
behavior alias is modified before being sent to the target
zone or policy service
Leave: the alias is not modified.
Strip: the matching prefix or suffix is removed
from the alias.
Replace: the matching part of the alias is
substituted with the text in the Replace string.
Replace The string to substitute for the part of the alias
string that matches the pattern.
On Controls the ongoing search behavior if the
successful alias matches the search rule.
match
Continue: continue applying the remaining
search rules (in priority order) until the endpoint
identified by the alias is found.
Stop: do not apply any more search rules, even
if the endpoint identified by the alias is not found
in the target zone.
Target The zone or policy service to query if the alias
matches the search rule.
State Indicates if the search rule is enabled or not.
Cisco VCS Administrator Guide (X7.2)
Usage tips
Applies only if the Mode is Alias Pattern
Match.
You can test whether a pattern matches a
particular alias and is transformed in the
expected way by using the
tool
regular expression.
Applies only if the Mode is Alias Pattern
Match.
The VCS has a set of predefined
matching variables
against certain configuration elements.
Applies only if the Mode is Alias Pattern
Match.
If you want to transform the alias before
applying search rules you must use
search
Only applies if the Pattern behavior is
Replace.
You can use regular expressions.
If Stop is selected, any rules with the same
priority level as this rule are still applied.
You can configure external
use as a target of search rules. This could be
used, for example, to call out to an external
service or application, such as a Conference
Factory. The service will return some CPL
which could, for example, specify a new
destination alias which would start the search
process over again.
Use this setting when making or testing
configuration changes, or to temporarily
enable or disable certain rules. Any disabled
rules still appear in the rules list but are
ignored.
Dial plan and call processing
Check pattern
(Maintenance > Tools > Check
that can be used to match
transforms.
policy services
Page 173 of 498
pattern).
pattern
pre-
to