Cisco TelePresence Administrator's Manual page 423

Reference material
Registration RestrictionPolicy Service Status Path: <S: 0..255>
Specifies the path for obtaining the remote service status.
Default: status
Example: xConfiguration Registration RestrictionPolicy Service Status Path: status
Registration RestrictionPolicy Service TLS CRLCheck Mode: <On/Off>
Controls certificate revocation list checking of the certificate supplied by the policy service. When enabled, the
server's X.509 certificate will be checked against the revocation list of the certificate authority of the certificate.
Default: Off
Example: xConfiguration Registration RestrictionPolicy Service TLS CRLCheck Mode: Off
Registration RestrictionPolicy Service TLS Verify Mode: <On/Off>
Controls X.509 certificate checking and mutual authentication between this VCS and the policy service. When
enabled, the server's FQDN or IP address, as specified in the address field, must be contained within the server's
X.509 certificate (in either the Subject Common Name or the Subject Alternative Name attributes).
Default: On
Example: xConfiguration Registration RestrictionPolicy Service TLS Verify Mode: On
Registration RestrictionPolicy Service UserName: <S: 0,30>
Specifies the user name used by the VCS to log in and query the remote service.
Example: xConfiguration Registration RestrictionPolicy Service UserName: "user123"
ResourceUsage Warning Activation Level: <0..100>
Controls if and when the VCS will warn that it is approaching its maximum licensed capacity for calls or
registrations. The number represents the percentage of the maximum that, when reached, will trigger a warning.
0: Warnings will never appear.
Default: 90
Example: xConfiguration ResourceUsage Warning Activation Level: 90
Services AdvancedMediaGateway Policy Mode: <On/Off>
Controls whether the policy rules are used to control access to the Advanced Media Gateway.
Default: Off
Example: xConfiguration Services AdvancedMediaGateway Policy Mode: On
Services AdvancedMediaGateway Policy Rules Rule [1..200] Action: <Allow/Deny>
The action to take if the source or destination alias of the call matches this policy rule.
Allow: the call can connect via the Advanced Media Gateway.
Deny: the call can connect but it will not use Advanced Media Gateway resources.
Default: Allow
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Action: Allow
Services AdvancedMediaGateway Policy Rules Rule [1..200] Description: <S: 0,64>
A free-form description of the Advanced Media Gateway policy rule.
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Description:
"Deny all calls to branch office"
Cisco VCS Administrator Guide (X7.2) Page 423 of 498