Cisco TelePresence Administrator's Manual page 397

ID Title
45010 Configuration
warning
45011 Configuration
warning
45012 Configuration
warning
45013 Configuration
warning
45014 Configuration
warning
45016 Configuration
warning
45017 Configuration
warning
55001 B2BUA service
restart required
Cisco VCS Administrator Guide (X7.2)
Description
The VCS is running in a
legacy TMS Agent mode; you
are recommended to switch
your system to use a different
mode
The VCS is running in a
legacy TMS Agent mode; you
are recommended to switch
your system to use a different
mode
For Presence services to work
correctly, authentication policy
must be enabled on the
Default Subzone and any
other relevant subzone;
authentication must also be
enabled on the Default Zone if
the endpoints are not
registered
For phone book requests to
work correctly, authentication
policy must be enabled on the
Default Subzone and any
other relevant subzone;
authentication must also be
enabled on the Default Zone if
the endpoints are not
registered
H.323 is enabled in a zone
with a SIP media encryption
mode of "Force encrypted" or
"Force unencrypted"
A zone has a SIP media
encryption mode of "Best
effort" or "Force encrypted" but
the transport is not TLS. TLS is
required for encryption.
A subzone has a SIP media
encryption mode of "Best
effort" or "Force encrypted" but
TLS is not enabled. TLS is
required for encryption.
Some B2BUA service specific
configuration has changed,
however a restart is required
for this to take effect
Solution
If you are using TMS for device
provisioning or FindMe: use TMS to
configure the VCS's connection to the
TMS Provisioning Extension services
and to switch to Provisioning Extension
mode; if you are not using TMS: go to the
Configuring FindMe page and click
'Switch from TMS Agent to VCS local
database'
Use TMS to configure the VCS's
connection to the TMS Provisioning
Extension services and to switch to
Provisioning Extension mode
Set authentication policy to either "Check
credentials" or "Treat as authenticated"
for the Default Subzone and each
relevant subzone and zone
Set authentication policy to either "Check
credentials" or "Treat as authenticated"
for the Default Subzone and each
relevant subzone and zone
On the relevant zone, either disable
H.323 or select a different SIP media
encryption mode
On the relevant zone, either set the SIP
transport to TLS or select a different SIP
media encryption mode
Either enable TLS on the SIP
configuration page or select a different
SIP media encryption mode for the
relevant subzone or Default Subzone
Restart the B2BUA service
Reference material
Severity
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Page 397 of 498