Cisco TelePresence Administrator's Manual page 396

ID Title
40032 Security alert
40033 Configuration
warning
40034 Security alert
45001 Failed to load
Call Policy file
45002 Configuration
warning
45003 Configuration
warning
45004 Configuration
conflict
45005 Configuration
conflict
45006 Configuration
warning
45007 Configuration
warning
45008 Configuration
warning
45009 Configuration
warning
Cisco VCS Administrator Guide (X7.2)
Description
Unable to initialize firewall
The Default Zone access rules
are enabled, but leaving SIP
over UDP or SIP over TCP
enabled offers a way to
circumvent this security feature
Firewall rules activation failed;
the firewall configuration
contains rules with duplicated
priorities
<failure details>
Expected default link between
the Default Subzone and the
Default Zone is missing
H.323 and SIP modes are set
to Off; one or both of them
should be enabled
The FindMe mode is set to On
or Remote service but the
FindMe option key has been
deleted
H323-SIP Protocol
Interworking mode is set to
Registered only but the H323-
SIP Interworking Gateway
option key has been deleted
Expected default link between
the Default Subzone and the
Cluster Subzone is missing
Expected default link between
the Default Subzone and the
Traversal Subzone is missing
Expected default link between
the Traversal Subzone and the
Default Zone is missing
For provisioning to work
correctly, authentication policy
must be enabled on the
Default Zone and any other
relevant zone that receives
provisioning requests
Solution
Restart the system; if the problem
persists, contact your Cisco
representative
Either disable UDP and TCP on the
page to enforce certificate identity
checking using TLS, or disable the
access rules for the Default
Check your firewall rules configuration,
ensure all rules have a unique priority
and re-try the activation
Configure Call Policy
Configure default links
Configure H.323 and/or SIP
Reconfigure FindMe mode
the option key
Reconfigure Interworking mode
reinstall the option key
Configure default links
Configure default links
Configure default links
Set authentication policy to either 'Check
credentials' or 'Treat as authenticated' for
each relevant zone
Reference material
Severity
Warning
SIP Warning
Zone.
Warning
Warning
Warning
modes Warning
or reinstall Warning
or Warning
Warning
Warning
Warning
Warning
Page 396 of 498