Cisco TelePresence Administrator's Manual page 424

Reference material
Services AdvancedMediaGateway Policy Rules Rule [1..200] Name: <S: 0,50>
Assigns a name to this Advanced Media Gateway policy rule.
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Name: "Deny
branch calls"
Services AdvancedMediaGateway Policy Rules Rule [1..200] Pattern String: <S: 0,60>
The pattern against which the alias is compared.
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Pattern
String: ".branch@example.com"
Services AdvancedMediaGateway Policy Rules Rule [1..200] Pattern Type: <Exact/Prefix/Suffix/Regex>
The way in which the pattern must match either the source or destination alias of the call.
Exact: the entire pattern string must exactly match the alias character for character.
Prefix: the pattern string must appear at the beginning of the alias.
Suffix: the pattern string must appear at the end of the alias.
Regex: the pattern string is treated as a regular expression.
Default: Exact
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Pattern Type:
Suffix
Services AdvancedMediaGateway Policy Rules Rule [1..200] Priority: <1..65534>
Determines the order in which the rules are applied. The rules with the highest priority (1, then 2, then 3 and so
on) are applied first. If multiple rules have the same priority they are applied in configuration order.
Default: 100
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 Priority: 50
Services AdvancedMediaGateway Policy Rules Rule [1..200] State: <Enabled/Disabled>
Indicates if the policy rule is enabled or disabled. Disabled policy rules are ignored.
Default: Enabled
Example: xConfiguration Services AdvancedMediaGateway Policy Rules Rule 1 State: Enabled
Services AdvancedMediaGateway Zone Name: <S: 0,50>
The zone used by the VCS to connect to one or more Advanced Media Gateways.
Example: xConfiguration Services AdvancedMediaGateway Zone Name: "AM gateway zone"
SIP Authentication Digest Nonce ExpireDelta: <30..3600>
Specifies the maximum time (in seconds) that a nonce may be re-used for.
Default: 300
Example: xConfiguration SIP Authentication Digest Nonce ExpireDelta: 300
SIP Authentication Digest Nonce Length: <32..512>
Length of nonce or cnonce to generate for use in SIP Digest authentication.
Default: 60
Example: xConfiguration SIP Authentication Digest Nonce Length: 60
Cisco VCS Administrator Guide (X7.2) Page 424 of 498