Cisco TelePresence Administrator's Manual page 305

If the system is still running in legacy TMS Agent database mode you have an additional option to restore a
backup of the VCS's TMS Agent database
To restore the VCS to a previous set of TMS Agent data:
1. Go to the Backup and restore
2. In the Restore section, Browse to the backup file containing the configuration you want to restore.
3. In the Decryption password field, enter the password that was used to create the backup file, or leave it
blank if the backup file was created without a password.
4. Click Upload TMS Agent backup file.
5. The VCS checks the file and restores its contents.
If the backup file is not valid or an incorrect decryption password is entered, you will receive an error
l
message at the top of the
Cisco VCS Administrator Guide (X7.2)
page (Maintenance > Backup and
Backup and restore page.
Maintenance
restore).
Page 305 of 498