Configuring Network Log Levels; Configuring Support Log Levels - Cisco TelePresence Administrator's Manual

Configuring Network Log levels

The Network Log configuration
configuration) is used to configure the log levels for the range of Network Log message modules.
CAUTION: changing the logging levels can affect the performance of your system. You should only change
a log level on the advice of Cisco customer support.
To change a logging level:
1. Click on the Name of the module whose log level you want to modify.
2. Choose the required Level from the drop-down list.
A log level of Fatal is the least verbose; Trace is the most verbose.
l
Each message category has a log level of Info by default.
l
3. Click Save.

Configuring Support Log levels

The Support Log configuration
configuration) is used to configure the log levels for the range of Support Log message modules.
CAUTION: changing the logging levels can affect the performance of your system. You should only change
a log level on the advice of Cisco customer support.
To change a logging level:
1. Click on the Name of the module whose log level you want to modify.
2. Choose the required Level from the drop-down list.
A log level of Fatal is the least verbose; Trace is the most verbose.
l
Each message category has a log level of Info by default.
l
3. Click Save.
Cisco VCS Administrator Guide (X7.2)
page (Maintenance > Diagnostics > Advanced > Network Log
page (Maintenance > Diagnostics > Advanced > Support Log
Maintenance
Page 308 of 498