Cisco TelePresence Administrator's Manual page 426

Video communication server
Hide thumbs Also See for TelePresence:
Table of Contents

Advertisement

Reference material
SIP MediaRouting ICE Mode: <On/Off>
Controls whether the VCS takes the media for an ICE to non-ICE call where the ICE participant is thought to be
behind a NAT device.
Default: Off
Example: xConfiguration SIP MediaRouting ICE Mode: Off
SIP Mode: <On/Off>
Determines whether or not the VCS will provide SIP registrar and SIP proxy functionality. This mode must be
enabled in order to use either the Presence Server or the Presence User Agent.
Default: On
Example: xConfiguration SIP Mode: On
SIP Registration Call Remove: <Yes/No>
Specifies whether associated calls are dropped when a SIP registration expires or is removed.
Default: No
Example: xConfiguration SIP Registration Call Remove: No
SIP Registration Outbound Flow Timer: <0..600>
Specifies the value for the Flow-Timer header in Outbound registration responses. It defines the number of
seconds after which the server will consider the registration flow to be dead if no keep-alive is sent by the user
agent.
Default: 0 (no header is added)
Example: xConfiguration SIP Registration Outbound Flow Timer: 0
SIP Registration Outbound Refresh Maximum: <30..7200>
The maximum allowed value for a SIP registration refresh period for Outbound registrations. Requests for a value
greater than this will result in a lower value (calculated according to the Outbound registration refresh strategy)
being returned.
Default: 3600 seconds
Example: xConfiguration SIP Registration Outbound Refresh Maximum: 3600
SIP Registration Outbound Refresh Minimum: <30..7200>
The minimum allowed value for a SIP registration refresh period for Outbound registrations. Requests for a value
lower than this value will result in the registration being rejected with a 423 Interval Too Brief response.
Default: 600 seconds
Example: xConfiguration SIP Registration Outbound Refresh Minimum: 600
SIP Registration Outbound Refresh Strategy: <Maximum/Variable>
The method used to generate the SIP registration expiry period for Outbound registrations.
Maximum: uses the lesser of the configured maximum refresh value and the value requested in the registration.
Variable: generates a random value between the configured minimum refresh value and the lesser of the
configured maximum refresh value and the value requested in the registration.
Default: Variable
Example: xConfiguration SIP Registration Outbound Refresh Strategy: Variable
Cisco VCS Administrator Guide (X7.2)
Page 426 of 498

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence x7.2

Table of Contents