Cisco TelePresence Administrator's Manual page 371

String Represents value returned by...
%ipv6% xConfiguration Ethernet 1 IP V6
Address
xConfiguration Ethernet 2 IP V6
Address
%ipv6_1% xConfiguration Ethernet 1 IP V6
Address
%ipv6_2% xConfiguration Ethernet 2 IP V6
Address
%localdomains% xConfiguration SIP Domains Domain
1 Name
...
xConfiguration SIP Domains Domain
200 Name
%localdomain1% xConfiguration SIP Domains Domain
... 1 Name
%localdomain200% ...
xConfiguration SIP Domains Domain
200 Name
%systemname% xConfiguration SystemUnit Name
You can test whether a pattern matches a particular alias and is transformed in the expected way by using
the Check pattern tool (Maintenance > Tools > Check
Cisco VCS Administrator Guide (X7.2)
When used in a Pattern field
Matches the IPv6 addresses
currently configured for LAN
1 and LAN 2.
Applies to all peer addresses
if the VCS is part of a cluster.
Matches the IPv6 address
currently configured for LAN
1.
Applies to all peer addresses
if the VCS is part of a cluster.
Matches the IPv6 address
currently configured for LAN
2.
Applies to all peer addresses
if the VCS is part of a cluster.
Matches all the SIP domains
currently configured on the
VCS.
Matches the specified SIP
domain. Up to 200 SIP
domains can be configured
on the VCS, and they are
identified by an index number
between 1 and 200.
Matches the VCS's System
Name.
pattern).
Reference material
When used in a
Replace field
not applicable
Replaces the
string with the LAN
1 IPv6 address.
If the VCS is part of
a cluster, the
address of the
local peer is
always used.
Replaces the
string with the LAN
2 IPv6 address.
If the VCS is part of
a cluster, the
address of the
local peer is
always used.
not applicable
Replaces the string
with the specified
SIP domain.
Replaces the string
with the VCS's
System Name.
Page 371 of 498