Configuring Language Settings; Changing The Language; Installing Language Packs - Cisco TelePresence Administrator's Manual

Configuring language settings

The Language page (Maintenance >
web user interface.

Changing the language

You can configure both the default language and the language to use on an individual browser:
Field Description
System The default language used on the web
default interface.
language
This The language used by the current browser
browser on the current client computer. It can be set
to use either the system default language or
a specific alternative language.
Note:
You can also get to the
n
If you upgrade to a later version of VCS software you may need to install a later version of the associated
n
language pack to ensure that all text is available in the chosen language.

Installing language packs

You can install new language packs or install an updated version of an existing language pack.
To install a language pack:
1. Click Browse and select the .tlp language pack file you want to upload.
2. Click Install language pack.
The selected language pack is then verified and uploaded, and then made available for selection in the
Language drop-down.
Note that you cannot create your own language packs. Language packs can only be obtained from Cisco.
Refer to your Cisco support representative for information on currently available language packs.
Cisco VCS Administrator Guide (X7.1)
Language) controls which language is used for text displayed in the
Language page by clicking on the
Usage tips
You can select from the set of installed language packs.
This setting applies to the browser currently in use on
the client computer. If you access the VCS user
interface using a different browser or a different
computer, a different language setting may be in place.
Language link at the bottom of every page.
Maintenance
Page 273 of 479