Cisco TelePresence Administrator's Manual page 417

Reference material
Login Remote LDAP Server Address: <S: 0,128>
Sets the IP address or Fully Qualified Domain Name (FQDN) of the LDAP server to use when making LDAP
queries.
Example: xConfiguration Login Remote LDAP Server Address: "server.example.com"
Login Remote LDAP Server FQDNResolution: <AddressRecord/SRVRecord>
Sets how the LDAP server address is resolved if specified as an FQDN.
AddressRecord: DNS A or AAAA record lookup.
SRVRecord: DNS SRV record lookup.
Default: AddressRecord
Example: xConfiguration Login Remote LDAP Server FQDNResolution: AddressRecord
Login Remote LDAP Server Port: <1..65534>
Sets the IP port of the LDAP server to use when making LDAP queries. Typically, non-secure connections use
389 and secure connections use 636.
Default: 389
Example: xConfiguration Login Remote LDAP Server Port: 389
Login Remote LDAP VCS BindDN: <S: 0,255>
Sets the user distinguished name to use when binding to the LDAP server.
Example: xConfiguration Login Remote LDAP VCS BindDN: "VCSmanager"
Login Remote LDAP VCS BindPassword: <S: 0,122>
Sets the password to use when binding to the LDAP server. The maximum plaintext length is 60 characters,
which is then encrypted.
Example: xConfiguration Login Remote LDAP VCS BindPassword: "password123"
Login Remote LDAP VCS BindUsername: <S: 0,255>
Sets the username to use when binding to the LDAP server. Only applies if using SASL.
Example: xConfiguration Login Remote LDAP VCS BindUsername: "VCSmanager"
Login Remote Protocol: <LDAP>
The protocol used to connect to the external directory.
Default: LDAP
Example: xConfiguration Login Remote Protocol: LDAP
Option [1..64] Key: <S: 0, 90>
Specifies the option key of your software option. These are added to the VCS in order to add extra functionality,
such as increasing the VCS's capacity. Contact your TANDBERG representative for further information.
Example: xConfiguration Option 1 Key: "1X4757T5-1-60BAD5CD"
Cisco VCS Administrator Guide (X7.2) Page 417 of 498