Cisco TelePresence Administrator's Manual page 409

Reference material
Bandwidth Downspeed PerCall Mode: <On/Off>
Determines whether or not the VCS will attempt to downspeed a call if there is insufficient per-call bandwidth
available to fulfill the request.
On: the VCS will attempt to place the call at a lower bandwidth.
Off: the call will be rejected.
Default: On
Example: xConfiguration Bandwidth Downspeed PerCall Mode: On
Bandwidth Downspeed Total Mode: <On/Off>
Determines whether or not the VCS will attempt to downspeed a call if there is insufficient total bandwidth
available to fulfill the request.
On: the VCS will attempt to place the call at a lower bandwidth.
Off: the call will be rejected.
Default: On
Example: xConfiguration Bandwidth Downspeed Total Mode: On
Bandwidth Link [1..3000] Name: <S: 1, 50>
Assigns a name to this link.
Example: xConfiguration Bandwidth Link 1 Name: "HQ to BranchOffice"
Bandwidth Link [1..3000] Node1 Name: <S: 0, 50>
Specifies the first zone or subzone to which this link will be applied.
Example: xConfiguration Bandwidth Link 1 Node1 Name: "HQ"
Bandwidth Link [1..3000] Node2 Name: <S: 0, 50>
Specifies the second zone or subzone to which this link will be applied.
Example: xConfiguration Bandwidth Link 1 Node2 Name: "BranchOffice"
Bandwidth Link [1..3000] Pipe1 Name: <S: 0, 50>
Specifies the first pipe to be associated with this link.
Example: xConfiguration Bandwidth Link 1 Pipe1 Name: "512Kb ASDL"
Bandwidth Link [1..3000] Pipe2 Name: <S: 0, 50>
Specifies the second pipe to be associated with this link.
Example: xConfiguration Bandwidth Link 1 Pipe2 Name: "2Gb Broadband"
Bandwidth Pipe [1..1000] Bandwidth PerCall Limit: <1..100000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one
call.
Default: 1920
Example: xConfiguration Bandwidth Pipe 1 Bandwidth PerCall Limit: 256
Bandwidth Pipe [1..1000] Bandwidth PerCall Mode: <Limited/Unlimited/NoBandwidth>
Determines whether or not this pipe is limiting the bandwidth of individual calls.
NoBandwidth: no bandwidth available. No calls can be made on this pipe.
Default: Unlimited
Example: xConfiguration Bandwidth Pipe 1 Bandwidth PerCall Mode: Limited
Cisco VCS Administrator Guide (X7.2) Page 409 of 498