Stripping @Domain For Dialing To H.323 Numbers - Cisco TelePresence Administrator's Manual

Field Value
Pattern type Suffix
Pattern string example.com
Pattern behavior Replace
Replace string example.co.uk
On successful match Continue
Target zone Head office
State Enabled
Rule #2
Field Value
Rule name Transform to example.net
Description Transform example.com to example.net
Priority 100
Source Any
Request must be No
authenticated
Mode Alias pattern match
Pattern type Suffix
Pattern string example.com
Pattern behavior Replace
Replace string example.net
On successful match Continue
Target zone Head office
State Enabled

Stripping @domain for dialing to H.323 numbers

SIP endpoints can only make calls in the form of URIs - for example name@domain. If the caller does not
specify a domain when placing the call, the SIP endpoint automatically appends its own domain to the
number that is dialed. So if you dial 123 from a SIP endpoint, the search will be placed for 123@domain. If
the H.323 endpoint being dialed is registered as 123, the VCS will be unable to locate the alias 123@domain
and the call will fail.
If you have a deployment that includes both SIP and H.323 endpoints that register using a number, you will
need to set up the following
place calls from both SIP and H.323 endpoints to H.323 endpoints registered using their H.323 E.164 number
only.
Cisco VCS Administrator Guide (X7.2)
pre-search transform and local zone search rules. Together these will let users
Dial plan and call processing
Page 179 of 498