Dial Plan And Call Processing - Cisco TelePresence Administrator's Manual

Dial plan and call processing

This section provides information about the pages that appear under the Calls, Dial plan, Transforms, Call
Policy and Advanced Media Gateway sub-menus of the VCS Configuration menu. These pages are used to
configure the way in which the VCS receives and processes calls.
This section includes:
an overview of the VCS's
n
how hop counts affect the search process
n
how to configure the VCS's
n
the pre-search transform process
n
the search and zone transform process
n
how to use Call Policy
n
routing calls via the Cisco TelePresence Advanced Media Gateway
n
the different address dial formats
n
how to set up your network to handle incoming and outgoing calls made via
n
call signaling configuration options
n
how to identify calls
n
how to disconnect calls
n
Cisco VCS Administrator Guide (X7.2)
call routing process
dial plan options
to manage calls
that can be used to initiate a call
URI dialing and ENUM dialing
Page 161 of 498