Query A Zone For Two Or More Transformed Aliases - Cisco TelePresence Administrator's Manual

Field Value
Rule name Overseas office - strip domain
Description Query overseas office with domain removed
Priority 100
Source Any
Request must be No
authenticated
Mode Alias pattern match
Pattern type Suffix
Pattern string @example.com
Pattern behavior Strip
On successful match Continue
Target zone Overseas office
State Enabled

Query a zone for two or more transformed aliases

Zones are queried in order of priority of the search rules configured against them.
It is possible to configure multiple search rules for the same zone each with, for example, the same Priority
and an identical Pattern string to be matched, but with different replacement patterns. In this situation, the
VCS queries that zone for each of the new aliases simultaneously. (Any duplicate aliases produced by the
transforms are removed prior to the search requests being sent out.) If any of the new aliases are found by
that zone, the call is forwarded to the zone. It is then up to the controlling system to determine the alias to
which the call will be forwarded.
For example, you may want to configure your dial plan so that when a user dials an alias in the format
name@example.com. the VCS queries the zone simultaneously for both name@example.co.uk and
name@example.net.
To achieve this, from the
New) set up two search rules as follows:
Rule #1
Field Value
Rule name Transform to example.co.uk
Description Transform example.com to example.co.uk
Priority 100
Source Any
Request must be No
authenticated
Mode Alias pattern match
Cisco VCS Administrator Guide (X7.2)
Create search rule page (VCS configuration > Dial plan > Search rules >
Dial plan and call processing
Page 178 of 498