Query A Zone For Two Or More Transformed Aliases - Cisco TelePresence Administrator's Manual

Field
Rule name
Description
Priority
Source
Request must be
authenticated
Mode
Pattern type
Pattern string
Pattern behavior
On successful match
Target zone
State

Query a zone for two or more transformed aliases

Zones are queried in order of priority of the search rules configured against them.
It is possible to configure multiple search rules for the same zone each with, for example, the same Priority
and an identical Pattern string to be matched, but with different replacement patterns. In this situation, the
VCS queries that zone for each of the new aliases simultaneously. (Any duplicate aliases produced by the
transforms are removed prior to the search requests being sent out.) If any of the new aliases are found by
that zone, the call is forwarded to the zone. It is then up to the controlling system to determine the alias to
which the call will be forwarded.
For example, you may want to configure your dial plan so that when a user dials an alias in the format
name@example.com. the VCS queries the zone simultaneously for both name@example.co.uk and
name@example.net.
To achieve this, from the
New) set up two search rules as follows:
Rule #1
Field
Rule name
Description
Priority
Source
Request must be
authenticated
Mode
Cisco VCS Administrator Guide (X7.1)
Value
Overseas office - strip domain
Query overseas office with domain removed
100
Any
No
Alias pattern match
Suffix
@example.com
Strip
Continue
Overseas office
Enabled
Create search rule page
Value
Transform to example.co.uk
Transform example.com to example.co.uk
100
Any
No
Alias pattern match
(VCS configuration > Dial plan > Search rules >
Dial plan and call processing
Page 165 of 479