Status Overview - Cisco TelePresence Administrator's Manual

Overview and status information

Status overview

The Overview page (Status >
cluster, if applicable). This page is displayed by default after logging in to the VCS as an administrator.
The following information is displayed:
Field Description
System information: many of the items in this section are configurable; click on the item name to go to its
configuration page.
System name The name that has been assigned to the VCS.
Up time The amount of time that has elapsed since the system last restarted.
Software version The version of software that is currently installed on the VCS.
IPv4 address The VCS's IPv4 addresses.
IPv6 address The VCS's IPv6 addresses.
Options The maximum number of calls and registrations, and the availability of additional VCS
features such as TURN Relays, FindMe™, Device Provisioning and Advanced Networking,
are controlled through the use of
currently installed on the VCS.
Resource usage
This section provides statistics about the current and cumulative license usage for calls and registrations.
It shows current and peak (highest concurrent) usage broken down by:
Unified CM remote session calls (if Unified Communications Mobile and remote access is enabled)
n
Traversal calls
n
Non-traversal calls
n
SIP traversal audio-only calls
n
Registrations
n
TURN relays (VCS Expressway only)
n
It also displays resource and license usage information:
Monitored resource usage, expressed as a percentage of the system capacity.
n
Current and peak license usage, expressed as a percentage of the available licenses for each license type.
n
Each traversal call license allows either 1 video call or 2 audio-only SIP calls. Hence, a 100 traversal call
license would allow, for example, 90 video and 20 SIP audio-only simultaneous calls. Any other audio-only
call (non-traversal, H.323 or interworked) will consume a standard video call license (traversal or non-
traversal as appropriate).
You can view details of current calls or registrations by clicking on the relevant item in the section.
All statistics are based on data since the system was last restarted. The information on this page refreshes
automatically every 5 seconds.
Total usage statistics are also shown (unless Unified Communications Mobile and remote access is
enabled, in which case this data is shown on the
Cisco VCS Administrator Guide (X8.1.1)
Overview) provides an overview of the current status of the VCS (or VCS
option
Resource usage
keys. This section shows all the options that are
page only).
Status overview
Page 321 of 507